Salter Brecknell B220 - Manual (Page 17)

17 B220 Counting Scale User’s Manual
After you change a
value, you must go to
the next branch to
accept the value.
You MUST press the
Clear key to clear a
value before keying in
a new one.
Management mode is a menu structure you enter to set
various options in the B220. The display will look similar
to that shown in Figure 4 when you are in management
mode.
Figure 4
Management mode display sample
You use the following keys to enter and navigate
through the menu and set the options. Also see the note
at left.
Short press this key, then key in the number
6231 to enter the management mode.
Long press this key to move to the next
branch. Short press this key to move to the
next sub-branch.
Long press this key to go to the previous
branch. Short press this key to go to the
previous sub-branch.
Short press this key to select the value to be
changed. Long press this key to return to
branch 00.
Short press this key to increment the value.
Long press this key to increment the value
10x.
Press the followed by the key to exit
management mode.
Management Mode