Salter Brecknell B220 - Manual (Page 12)

12 B220 Counting Scale User’s Manual
Resampling Resampling can increase the counting accuracy of your
scale. You can do this manually or the scale can be set
up to do it automatically. The auto-update function must
be set through menus found in the Service Manual.
Below are the instructions for manual resampling.
Once you have sampled a group of items, you can add
an equal or greater amount to the scale and then
resample. Follow the steps below for this manual
resampling procedure.
Sample the items normally
as described above, then
add more items to the scale
(equal to or more than the
items already on the scale).
Long press the Sample
key. . .
The piece weight is
updated and the count is
shown.
Below are the steps to enter, view and clear piece
weights.
You can key in a known piece weight via the keypad.
Key in the weight in pounds if using lb units or key in the
weight in grams if in kg units, then short press the Pcwt/
Rcl key. This becomes the new active piece weight.
To view an active piece weight, short press the Pcwt/
Rcl key. The Pcwt. annunciator lights and the piece
weight is briefly shown on the display.
Short press the Pcwt/Rcl key and short press the Clear
key while the piece weight is displayed. The piece
weight is deleted and the weight is displayed.
Manual resampling
Keyboard Entry of
Piece Weights
Viewing Active Piece
Weight
Clearing the Active
Piece Weight
Using Piece
Weights
Short key press = 1
beep
Long key press = 2
beeps