Salter Brecknell B220 - Manual (Page 11)

11 B220 Counting Scale User’s Manual
3. If the calculated sample
weight is below the
minimum needed by
the scale for accuracy,
the display will ask
you to place more
items on the scale.
Place the items on the
scale and short press
the Sample key. . .
The weight of the samples
is shown on the middle
line of the display. The
number of items is shown
on the bottom line of the
display.
4. The scale is now ready
for counting.
The reverse sampling method is described below.
1. Be sure the scale is
empty and short press
the Zero key.
2. Place a quantity of
items on the scale,
then short press the
Sample key. . .
SPLE is displayed on the
top line of the display and
the weight of the samples
is shown on the middle
line.
3. Remove and count
several items from the
scale, then key in this
number via the keypad.
Short press the
Sample key. . .
The weight and count of
all the items on the scale
is displayed.
4. The scale is ready to
count.
Short key press = 1
beep
Long key press = 2
beeps
The minimum sample
weight is set through
the management
mode. See the Service
Manual.
Reverse sampling