B&M 81011 MANUAL STREET ROD SHIFTER, 15 TALL STICK - Manual (Page 8)

STEP 1. PARK - from any position or gear push the shift knob
forcefully down and then forward as far as it will travel.
NOTE: if the engine does not start in this position than a
slight forward push or slight upward tug on the knob may
be required.
STEP 3. FIRST / DRIVE - from any position push the knob
forcefully down while pulling back, as far as it will travel
(this is "FIRST"). Without pushing the knob down, push
the knob forward. The shifter and transmission will click
through "SECOND" and then hard stop at "DRIVE".
STEP 2. REVERSE - from the "PARK" position, apply light
downward pressure on the shifter knob while pulling back
until the shifter stops.
SHIFTER OPERATION
The B&M Street Rod automatic shifter has been designed to operate a GM TH-350 transmission
through an intuitive sequence of motions that allow the driver to know exactly which gear or position
the transmission is in at all times. However this shifter has not been designed as a "race shifter" and
cannot be substituted as one (B&M does make many fine race shifters - see www.bmracing.com).
Please read and familiarize yourself with these operating instructions and be able to explain them to
anyone else who will be operating the vehicle as there is no visual indication of what gear or position
the transmission may be in.
shifter stick movement
mechanism movement
(larger scale)
" PARK "
shifter stick movement
mechanism movement
(larger scale)
" PARK "
" REVERSE "
shifter stick movement
mechanism movement
(larger scale)
" FIRST "
" DRIVE "
" SECOND "