B&M 64511 TV CABLE ADAPTER User Manual
B&M For the car
9500761-00
Printed in the U.S.A.
I
nstallation Instructions
Throttle Valve Cable Adapter
Edelbrock (GM with TV Cable)
Part Number 64511
©2001 by B&M Racing and Performance Products
STEP 1. Carefully disconnect any throttle cables attached to the carburetor's "linkage plate".
STEP 2. Align the top hole of the "TV corrector plate" with the "throttle cable stud hole" on the carburetor's "linkage
plate". Ensure that the indicated "TV stud" on the "TV corrector lever" faces away from the carburetor.
STEP 3. Place the "shim" included in the kit, between the carburetor's "linkage" plate and the "TVcorrector lever".
This will create the proper spacing for the new "throttle cable stud".
STEP 4. Install the "throttle cable stud" included in the kit but do not fully tighten the "nut".
Shim
Lock Washer
Nut
Throttle cable stud hole
Throttle Cable Stud
Edelbrock Carburetor
Linkage plate
Bolt hole
Lock Nut
TV stud
TV Corrector Lever
Washer
Bolt
- 10225 SHIFT IMPROVER KIT (7 pages)
- 10227 TRANSPAK (8 pages)
- 50231 TRANSKIT (1 page)
- 10230 FLEXPLATE (1 page)
- 10280 CAST DEEP PAN (2 pages)
- 10300 DEEP PAN, CHRYSLER NAG-1 (3 pages)
- 10310 CAST ALUMINUM FRONT END COVER FOR DANA 30 IS CONSTRUCTED OF A356.0-T6 ALUMINUM. THIS RUGGED UNIT DIS (2 pages)
- 10311 CAST ALUMINUM REAR END COVER FOR DANA 35 WAS DESIGNED TO STRENGTHEN THE REAR END BY PREVENTING CASE (3 pages)
- 10312 Dana 44 Rear End Cover, A356.0-T6 Aluminum (3 pages)
- 10314 DANA 60/70 COVER WAS DESIGNED TO FIT BOTH DANA 60 AND DANA 70 DIFFERENTIALS. CONSTRUCTED OF A356.0-T (3 pages)
- 10315 Dana 80 cover was designed to strengthen the axle by preventing case distortion, ring gear & cap bea (3 pages)
- 10497 BRACKET & LEVER KIT (1 page)
- 117101 STRT TRANS TH700R4 CHV WITH MECH SP (7 pages)
- 120001 SHIFT PLUS 2 TRANS CONTROLLER (19 pages)
- 120002 TPS FOR CARBUERETED KITS (2 pages)
- 20260 SHIFT IMPROVER KIT (6 pages)
- 20261 SHIFT IMPROVER KIT (6 pages)
- 20280 CAST DEEP PAN (2 pages)
- 20297 KICKDOWN SWITCH KIT (1 page)
- 20480 NITROUS HOLESHOT 2400 (6 pages)
- 22300 NAG-1 Locking Trans Dipstick (2 pages)
- 30228 TRANSPAK (8 pages)
- 30262 SHIFT IMPROVER KIT (8 pages)
- 30280 CAST DEEP PAN (2 pages)
- 35229 TRANSPAK (8 pages)
- 35265 SHIFT IMPROVER KIT (8 pages)
- 35498 BRACKET AND LEVER KIT (2 pages)
- 40227 TRANSPAK (18 pages)
- 40263 SHIFT IMPROVER KIT (16 pages)
- 40281 CAST DEEP PAN (1 page)
- 40291 CAST DEEP PAN (2 pages)
- 40295 CAST DEEP PAN (2 pages)
- 40297 CAST ALUMINUM REAR END COVER, FORD 8.8 (3 pages)
- 40298 Cast Aluminum Rear End Cover for Ford 9.75 (3 pages)
- 40422 HOLESHOT 2400 C6 SMALL PILOT (6 pages)
- 40496 BRACKET AND LEVER KIT (3 pages)
- 40497 BRACKET AND LEVER KIT (2 pages)
- 40504 BRACKET AND LEVER KIT, 4R70W (7 pages)
- 40505 BRACKET AND LEVER KIT, 4R100/E40D (7 pages)
- 45034 PRECISION SPORT SHIFTER - 08 & UP CORVETTE C6 & Z06 (11 pages)
- 45043 PRECISION SPORT SHIFTER - O4 + GTO (10 pages)
- 45043 PRECISION SPORT SHIFTER - O4 + GTO (1 page)
- 45044 PRECISION SPORT SHIFTER - C5 &C6 CORVETTE (15 pages)
- 45047 PRECISION SPORT SHIFTER - 88 - 00 HONDA (2 pages)
- 45048 PREC SHIFTER JEEP 99-01 JEEP WRANGL (12 pages)