Osd menu description, Event setup configure alarm, sensor, and motion – AVer EB3004_MD User Manual
Page 34
30
OSD MENU
Description
MAIN MENU
CAMERA/RECORD
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
SYSTEM
RECORD SCHEDULE
By default, in 24 hours, the recording schedule is set to always
record every hour. Refer to the table below to customize the
recording condition.
Condition
Description
NO RECORD
Not recording at all.
ALWAYS
Record non-stop.
SMART
Automatically switch to recorded at the FPS
(alarm) that is setup in CAMERA CHANNEL
SETTING once an alarm is detected and if there
is no motion, it records at the FPS that is setup
in CAMERA CHANNEL SETTING.
ALARM
Start recording when the alarm is activated.
VARIED
When each channel has different recording
schedule, the schedule table will display as
Green color (VARIED RECORD).
CAMERA
Select a channel (1, 2, 3, or 4) or ALL for record schedule
setup.
SET TO ALL
Select a recording condition – NO RECORD, ALAWAYS,
SMART or ALARM. Please refer to the above table for record
condition description.
RECORD SCHEDULE
SUN
CAMERA
SET TO ALL
ALL
ALWAYS
MON
TUE
WED
THU
FRI
SAT
00
02
04
06
08
10
12
14
16
18
20
22
24
: ALARM RECORD
: SMART RECORD
: VARIED RECORD
: NO RECORDING
MAIN MENU
CAMERA/RECORD
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
SYSTEM
EVENT SETUP
Configure alarm, sensor, and motion.
EVENT SETUP
ALARM SETTING
SENSOR SETTING
MOTION DETECTION