AVer System Contrll Pro quick guide - Manual (Page 5)

3
QUICK USER GUIDE
II. Hardware Installation
USB port connection
The following is an example of System controller installation for NV, SA, IWH Touch series,
SEB5108H/5116H series, EH5108H/5216H series and CMS server.
1.
The DVR/CMS server should be power on and DVR/CMS program is executed.
2. Plug the power cord of the System Controller into power outlet.
3. And then, plug the USB cable that is attached on the System Controller to the USB port of the
DVR/CMS server.
RS485 port connection
i - The RS485 connection doesn ’t support on SEB5108H/5116H series and
EH5108H/5216H series DVR.
- System Controller supports multiple DVR servers
’ connection for NV/SA DVR series
through RS485 connection.

RS485 port through RS232 to RS485 Converter
This way of installation is suitable for NV series, CMS server, SA5000, SA6000E, SA6000E Pro,
and SA7000H.
Before starting to make a connection, please prepare the following items:
RS232 cable RS485 to RS232 Converter
(*User can purchase from the dealer
** The RS232 to RS485 Converter needs to support
RS-485 automatic data direction control protocol )
Single core wire