AVer System Contrll Pro quick guide - Manual (Page 18)

16
VII. To Playback the Recorded File on DVR server
To playback the recorded file on surveillance screen.
1. Press button to switch to playback mode. The LCD screen will display “Playback”
message that means the DVR is in playback mode now.
2. The playback time and date selection window will appear on the surveillance screen. Using the
mouse or joystick (press the button to switch to mouse function) to select the time and
date that wants to playback.
3. After selected the time and date to playback, the DVR system will start to playback.
4. Using the Jog/Shuttle button to control the playback speed. Press to enable the
Jog/Shuttle button. To disable the Jog/Shuttle button, press button.
- Jog dial (top part): Rotate in clockwise is forward play frame-by-frame that control by
user. Rotate in counterclockwise is rewinding play frame-by-frame that control by user.
- Shuttle ring (lower part): Rotate in clockwise is play at increase speed of 1x, 2x, 4x, 8x,
16x, and 32x. Rotate in counterclockwise is rewinding playback.
5. To pause the playback, press button. Press again to start playback.
6. To exit playback mode, press button.
VIII. Playback on CMS server
In playback mode, user can playback real-time recorded file from monitored DVR servers,
download from monitored DVR servers and playback, and playback recorded file that has saved on
local hard disk.
Follow the below steps to playback:
1. Press button to switch to playback mode. The LCD screen will switch to the playback
mode.