AVer System Contrll Pro quick guide - Manual (Page 12)

10
3. In Mode setup screen, press button to switch the mode to 485 DVR mode.
4. Press button to confirm. To cancel the selection, press button. When the
“Complete” message appears on the LCD screen, the mode switch is completed.
Switching to USB CMS Mode
When the System Controller is connecting with CMS server through the USB port, the System
Controller mode should be in USB CMS mode in order to operate the CMS system. If the mode is
not USB CMS, please follow the below steps to switch to USB CMS mode.
i - The default mode is USB CMS mode
- The 485 PTZ and 485 DVR mode
doesn’t support for CMS system.
- Please remember to setup the System Controller Pro as System Controller model on
CMS server.
1. In main menu, press and select (system controller setting).