AVer System Contrll Pro quick guide - Manual (Page 10)

8
8. Click OK to complete the setting.
IV. Select the Operation Mode on System Controller
For System Controller to operate the DVR system normally, the connecting mode must correspond
with the way of connection (USB or RS-485) between System Controller and DVR server.
i
The following figures might varied from you have seem on the System Controller because
it is due to the DVR server you have connected.
Switching to USB DVR Mode
When System Controller is connected with DVR server through the USB port, please select the
operating mode as USB DVR mode. The following steps describe how to switch from other
operating mode to USB DVR mode.
1. In 485 PTZ menu screen, press button to enter Controller setup screen.
2. Press button to enter Mode setup screen.
i
If the password function is enabled on System Controller, user needs to enter the password
that user has setup for mode switching.