AVer SA series - Manual (Page 94)

86
4.1.3.5 Switching to USB DVR Mode
When the System Controller is connecting with DVR system through the USB port, the System Controller
mode should be in USB DVR mode in order to operate the DVR system. If the mode is not USB DVR, please
follow the below steps to switch to USB DVR mode.
i - The default mode is USB DVR mode
- The USB CMS and 485 DVR mode is not supported in current version.
- If System Controller is connecting with PTZ camera through RS485 port, please refer to
Operating in PTZ
485 Mode for operation description.
1. In 485 PTZ menu screen, press button to enter Controller setup screen.
2. Press button to enter Mode setup screen.
i
If the password function is enabled, user needs to enter the password for mode switching.
3. In Mode setup screen, press button to switch the mode to USB DVR mode.
4. Press button to confirm. To cancel the selection, press button. When the “Complete”
message appears on the LCD screen, the mode switch is completed.