AVer SA series - Manual (Page 112)

104
Camera Setup
In Camera setup, user can enable/disable the camera, enable/disable camera video to be display on the
screen, adjust contrast/brightness/saturation/hue, enable/disable de-interlace, and enable/disable relay of
the IP camera.
 Enable a Camera
1. First, select the camera to configuration. Please refer to Select a
Camera .
2. At main menu screen, press the button to enter Camera Setup
screen.
3. In Camera Setup screen, press button to enter Camera
Enable screen.
4. To enable the camera for viewing and recording, press button.
Press button to disable the camera. When the camera has
been disabled, the camera video can ’t be view and record.
5. When user sees the “Complete” message, it means the operation is
done.
6. To go back to the Camera setup screen, press BACK button. To go
back to the main menu screen, press TOP MENU button.