AVer SA series - Manual (Page 246)

238
To Setup Send E-mail Setting
Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exit and
save the setting and Cancel to exit without saving the setting.
(1) Mail Server: Enter the SMTP Server and port. If your e-mail system requires user identification,
enable Authentication check box and enter User ID and Password.
(2) Mail: To check if it is working, click Test Account button.
- From: Enter the sender e-mail address.
- To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
- Subject: Enter the message title.
- Message: Type the message.
(3) Email Notice Setting
- Notice Interval: Set the period of time before it sends another e-mail notice.
- Embedded image
: Select the image size and set the number of frames.
- Attach image when sensor is triggered: When the sensor is triggered, the system will
capture the image and send the image to the certain e-mail address with the alarm message.
(4) Modem Dial up Setting: User may set the time to disconnect automatically, just enable the Auto
Disconnect after check box and set time.
(1)
(2)
(3)
(4)
To Setup FTP Setting
1. Next to the File Transmission via FTP check box, click Detail.
2. In the FTP Setting dialog box, enter the FTP IP, port, user ID
and password.
3. In Number of Pic text box, enter the number of sequence
images that want to send when file is transmitting. The
maximum number of picture can be transmitted are 16.
4. In Upload image when sensor is triggered, select the
camera that the images will be capture and send when the
sensor is triggered.
5. Click OK to exit and save the setting and Cancel to exit
without saving the setting.