Alarm setting – AVer SA series User Manual
Page 204
196
Alarm Setting
In the Alarm Setting window, click Add to insert and set new alarm setting, click Delete to remove the
selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to
revert back to original factory settings.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
To set the Alarm Setting:
1. Click Add to insert and set a new alarm setting. Click the items in the (8) Alarm Setting List, if you want
to modify the alarm setting.
2. In (1) Alarm Setting number/Name/Description, display the selected alarm setting number in the list
below. Enter alarm name and description.
3. In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Select the time and
click the block you want to activate or deactivate the alarm function. When it is deactivated the color of
the block turns white.
4. In (3) Conditions
, you can set “Trigger if any” to activate if it falls to one of the conditions or “Trigger if
all
” to activate if it falls to all conditions.
- In Camera section, select and click on the camera number (01 to 32) in Motion Detected and Video
Loss to set the condition for the system to alarm.
- In Missing and Suspicious Object/Scene, click the camera number (01 to 32) and select the
certain object on the screen (right click on camera number for detailed setting)), and when the certain
object is missing or doubtful, the system will alarm. (see also
) In Scene Change,
when the camera has been moved, the system will alarm, too.
- In Audio Detection, click the camera number (01 to 32) to the system to alarm when detect the
abnormal voice.
5. In (4) Sensor, select and click on the sensor number (use and to select the sensor) to set the