AVer SA series - Manual (Page 178)

170
4.9.5 To Setup FTP Setting:
1. Next to the File Transmission via FTP check box, click Detail.
2. In the FTP Setting dialog box, enter the FTP IP, port, user ID and password.
3. In Number of Pic text box, enter the number of sequence images that want to send when file is
transmitting.
4. In Upload image when sensor is triggered, select the camera that the images will be capture and
send when the sensor is triggered.
5. Click OK to exit and save the setting and Cancel to exit without saving the setting.
4.9.6 To Setup Alarm Recording Setting:
1. Next to the Start Recording check box, click Detail.
2. In the Alarm Recording Setting dialog box, select the camera to enable/disable video recording. Enable
All to select all cameras.
3. In the Frame Rate selection, select As Setting to record the number of frames based on the Recording
Setting or Max to record the maximum of frames based on the available speed.
4. In the Stop Recording after text box, set the number in second for the program to continue recording
after the alarm has ended.
5. Click OK to accept the new settings and Cancel to exit without saving.