AVer SA series - Manual (Page 163)

155
- Turn on Relay #
Active the Relay at the set time. If there are no Relays are connected, Turn on Relay # function will
not display in drag down list. The Relay number will depend on how many Relays are connected.
3. Specify to either schedule it weekly or one time. Click  to make a selection.
4. Click on the blocks to set the schedule (see also Chapter 4.5.1 ). Or click All to select all. To store the
setting, click Save. To remove the settings, click Clear.
5. To end Schedule Setting, click OK to exit and accept the setting and Cancel to exit without saving the
setting.
4.5.1 Set schedule at specific portion of time
1. Right click the colored blocks.
2. In the Select time dialog box, click to enable or disable the portion you want to set.
3. Click OK to accept the setting and Cancel to exit without saving the setting.