Alumax W1 User Manual
Page 5
VvVV
DOOR PANEL ASSEMBLY
1
3/8’’
11
19
5
INSTRUCTION MANUAL
9
7
DOOR HANDLE HOLES
Use a mallet to install bottom gasket (7) on the
bottom of the door panel (9). To facilitate installation
place door panel on cardboard packaging box and use
as platform. Notice the holes are situated at the top of
the panel.
Measure and cut 3/8” off the edge of the gasket.
Cut opposing side of door handle holes.
Install both rollers (11) through the top holes of the door
panel. Be sure that the adjustment wheel is turned to
position the minimum thickness of wheel towards the
bottom.
Install door handle (19). Holes for screws are located
on the back handle and must be located in the interior
of the shower door.
1a
1c
1c
1d
1d
1a
1b
1b
INTERIOR
SHOWER SIDE
MINIMUM THICKNESS
ORIENTED TOWARDS
THE BOTTOM
!!
INTERIOR
SHOWER SIDE
- 300c (9 pages)
- 300cv (8 pages)
- 300d (9 pages)
- 338 (9 pages)
- 340 (9 pages)
- 340 Deluxe (9 pages)
- 390c Supplement (5 pages)
- 390cv Supplement (4 pages)
- 391 (12 pages)
- 392 (11 pages)
- 393 (11 pages)
- 394 (11 pages)
- 640S (8 pages)
- 640 (8 pages)
- 640D (7 pages)
- 641 Side Panel (6 pages)
- 694 (6 pages)
- 700c (7 pages)
- 733 (8 pages)
- 738 (8 pages)
- 738 Towel Bar (1 page)
- 740D (8 pages)
- 790c Supplement (4 pages)
- 791 (11 pages)
- 792 (12 pages)
- 793 (12 pages)
- 793 Buttress Supplement (1 page)
- 794 (11 pages)
- 794s (9 pages)
- 795 (10 pages)
- 890 (9 pages)
- 890c (8 pages)
- 1040 (9 pages)
- Deluxe Towel Bar (1 page)
- Transportation Latch (1 page)
- DesignLine Hinge (5 pages)
- P-DR1W-48-60 (14 pages)
- P-DR1W-72 (15 pages)
- P-DR1WT-60 (14 pages)
- P-DR2W-48-60-CRP (18 pages)
- P-DR2W-48-60-CW (19 pages)
- P-DR2W-72-CRP (19 pages)
- P-DR2W-72-CW (19 pages)
- P-DR3W-60 (32 pages)
- P-DRA1Y (16 pages)