Replacing the remote control battery, Pull out the battery holder, B-41 – Canon SURE SHOT 105 ZOOM S User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control Photography
Replacing the Remote Control Battery
Replace the battery when you can no longer use the
remote control to take photos.
Battery: one CR2032 3V lithium battery
1
Pull out the battery
holder.
• Use a pen or other pointed
implement to push in the
release button © as you
slide the battery holder out
Load a new battery into
the holder and fit the
holder back into the
remote control.
• Ensure that the + and -
terminals are positioned
correctly.
i
• Remote control photography may not be possible if
the remote control sensor on the camera is exposed
to sunlight or strong fluorescent light. In such
situations, use the self-timer to take the picture, or
move the camera to another location.
• The camera’s remote control function may not operate
correctly if the camera is close to a fluorescent light
during signal reception If this occurs, move the
camera away from the fluorescent light.
• Remote control shots can be taken for fhe 4 minufes
that ci)! is displayed
• Set the camera on a steady surface or use a tripod.
B-41