Canon IV-S2 - Manual (Page 32)

Keep the Reversing Lever still
at '"A". Pull up and turn the
Rewinding Lever gently in the
direction shown by the arrow
in the diagram. When it will
not turn further, your film is
taut, having taken up the
slack film in the magazine.
Lastly, turn the Film Winding
Knob and press the Shutter
Release Button. Repeat this
process once again. By doing
this you ensure that you will
not use the first two frames
which have been exposed to
light while you were loading.
See note on page 23 to verify
that you have correctly loaded
the film.
Next set the Exposure Counting
Dial at the base of the Film Wind­
ing Knob to "1" by turning it
counterclockwise with your thumb
nail catching one of the lugs on
the Dial. Each time the Winding
Knob is turned this Dial automa­
tically registers the next number.
2 2