Setting the shutter speed dials, There are two shutter speed dials, Fnjet: msrk – Canon IV-S2 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting The Shutter Speed Dials

There are two Shutter Speed Dials:

fnJet: Msrk

High :

for speeds between 1

(1/500 sec. on Model I

Slow :

for speeds between

T (Time)

/25 to 1/1000 sec,

l-D)& B (Bulb)

1 '25 to 1 sec. &

High Shutter Speed Dial

Correct exposures ore best obtained with on exposure meter or by following the instruction

supplied with the film.
To operate the camera at any of the speeds shown on the High Shutter Speed Dial, first
turn the Film Winding Knob. Raise the dial with thumb and forefinger and turn until the

speed required is exactly opposite the Index Mark and let the dial fall. For 1/1000 sec.,

the dial drops only half the distance of the other speeds. Intermediate speeds can not be used.

N0TE:

When the High Shutter Speed Dial is in use the Slow Shutter Speed Dial must be set at 25

{l/25 sec.).