Canon EOS Rebel 2000 - Manual (Page 43)

P Program AE
Compose the shot and press the
r
shutter button completely to take
the picture.
The Difference Between
P
and D
The and
<0>
modes set the same shutter speed and aperture
settings automatically for picture-taking. However, the available features
are different as shown below.
O: Settable by the user, x: Not settable by the user.
Feature P
r~l Full Auto
Continuous shooting
o
X
Program shift
0
X
Exposure compensation
o
X
Auto Exposure bracketing
o
X
Partiai metering/AE iock
o
X
Manuai focusing point selection
o
X
Built-in flash ON/OFF
o
X
High-speed sync with an EX-series Speedlite
o
X
FE lock with an EX-series Speedlite
o
X
About Program Shift
In the Program AE mode, you can freely change the shutter speed and
aperture combination (program) set by the camera while the same
exposure value is maintained. This is called program shift.
To shift the program, press the shutter button halfway and turn the
until the desired shutter speed or aperture is displayed.
• After the picture is taken with the shifted program, the shifted program is
canceled automatically and the original program is restored.
• If the built-in flash is used, the program cannot be shifted.
s “AE" stands for auloexposure.
43