Canon EOS Rebel 2000 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focusing Point Selection
3
Press the shutter button halfway.
• The camera will return to normal.
• Even if the shutter button is not
pressed halfway, the focusing point
selection mode will terminate after
about 6 sec.
If the focusing point has been selected manually and the Command Dial is
turned to Full Auto or a Programmed Image Control mode, the focusing point
seiection wiil switch to automatic.
Focusing Subjects not Covered by the Focusing Points i
If you want to focus a subject not covered by any of the focusing points,
use AF lock as described below.
THE IMAGE WAS REMOVED DUE
TO COPYRIGHT RESTRICTIONS
THE IMAGE WAS REMOVED DUE
TO COPYRIGHT RESTRICTIONS
Select the desired focusing point.
(See page 38.)
Aim the focusing point on the
subject, then press the shutter
button halfway to focus.
Keep pressing the shutter button
haifway and recompose the
picture as desired.
4
Press the shutter button
compietely to take the picture.
-:'ф:
r AF lock can also be used in the Basic Zone modes.
39