Metering modes – Canon EOS Rebel 2000 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Metering Modes
The camera has three metering modes: Evaluative, partial, and
centerweighted averaging metering. Evaluative metering is the standard
metering mode. Partial metering is set automatically \when AE lock Is used
(see page 51), and centenweighted averaging metering is set automatically
in the
o
□
□
□
□
□
o
□ □ □ □ □
□
Evaluative metering
This is suited for most picture-taking
situations including backlit conditions.
The subject's position and brightness,
the background, the existing light,
backlight conditions, and the active
focusing points are taken into account
to obtain a suitable exposure.
Partial metering
The exposure setting is based on the
brightness of an area 9.5% of the
viewfinder screen at the center. It is
effective for backlit subjects.
• The partial metering area (shaded) is
approximated by the diagram on the
left.
Centerweighted averaging
metering
The metering is weighted at the center
and then averaged for the entire
scene.
* •
0
ln the One-Shot AF and Al Focus AF modes (except Al Servo AF) (see page
64), AE lock takes effect automatically when you press the shutter button
halfway to focus.
• You cannot set or change the metering mode manually.
41