White balance auto bracketing – Canon EOS 1100 D User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Color Tons for the Lighi Source ■■
\ Co.
B/A bias ±3 levels
White Balance Auto Bracketing
With just one shot, three images having a different color balance can be
recorded simuitaneously. Based on the color temperature of the current white
balance setting, the image wiil be bracketed with a blue/amber bias or
magenta/green bias. This is called white balance bracketing (WB-BKT). White
balance bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing amount.
In step 2 for white balance correction,
when you turn the <£S> dial, the
mark on the screen will change to “■ ■ ®”
(3 points). Turning the dial to the right sets
the B/A bracketing, and turning it to the
left sets the
MIG
bracketing.
On the right, “Bracket” indicates the
bracketing direction and correction amount.
Pressing the
all the [WB Shift/BKT] settings.
Press <©> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
m
During WB bracketing, the continuous shooting speed will be slower. The
maximum burst for continuous shooting will also be lower and the number of
possible shots will decrease to one-third the normal number.
a
You can also set white balance correction and AEB (p.103) together with
white balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the card will take longer to
record the shot.
“BKT”
stands for Bracketing.
118