M: ttl autoflash and manual exposure, Mset the camera's command dial to
Page 38: Take the picture

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Flash in Other Picture-Taking Modes

M: TTL Autoflash and Manual Exposure

When you want to set both the shutter speed and aperture, use manual

exposure. TTL autoflash controls the flash output according to the aperture

you set. The background exposure is determined by the shutter speed and

aperture combination.

Set the camera's Command Dial

to .

•

Set the desired aperture and
shutter speed.

• Turn the camera's electronic dial.

• Set shutter speed anywhere from 30

sec. to the camera's fastest sync

speed.

Take the picture.

• Focus the subject, check that the

<“»>

icon is lit in the viewfinder, then

take the picture.

Page 38: Take the picture