Canon 814XL User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

subject position beforehand. Then set the ex

posure.

Rim Transport and Rim End Warning

When the film is being transported, the film

transport indicator in the viewfinder will be blink.

Two feet before film ends the warning lamp will

light. When the film has reached the end, the film

transport indicator will go out. Check the footage

counter and if it indicates 50, remove the film

cartridge.

Removal of Rim Cartridge

Open the rear cover by pushing the opening but

ton, pull out the cartridge removal lever located

at the bottom of the film compartment and with

draw the film cartridge. You can tell that the film

has been exposed by the cut on the perforations

and by the word 'EXPOSED'.

Send your film to be developed as soon as

possible.