No rewind the film – Nikon FG User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5—5
12 3 4
1.3mm dia. split-image spot
2.1 mm-wide microprism collar
3.12 mm dia. area
4. Fine matte/Fresnel outer field
5. Shutter speed scale
6. Top warning LED
7. Shutter speed LEDs
8. Bottom warning LED
9. Flash ready-light
10.
Thunderbolt mark
Notes;
1) The meter reads the light over the
entire focusing
screen
but is dis
tinctly
biased
toward
the
centra!
12mm dia. area.
2)
Frame
coverage
is
approx.
92%
which means actual photographs will
be slightly larger than the finder image.
A A At the end of the roll, push
the rewind button 3« .
After Ihe last exposure, the film advance lever will not
move, Depress the film rewind button on the camera
base plate to disengage the film sprocket drive so
you can rewind the exposed film back into its cartridge.
no Rewind the film.
" Fold out the film rewind crank and turn
gently in the direction of the arrow until you feel c
increased tension. Give it a few more turns until tf
tension is gone and the crank turns freely, indicatir
the film leader is rewound completely back into tf
cartridge.