Nikon SB 14 - Manual (Page 9)

Set the camera's shutter
speed for proper syn­
chronization.
Set the shutter speed dial to the prop­
er synchronization speed for elec­
tronic flash (e.g., set the F3 to the
“X" setting). For details, refer to the
chart on page 11.
Q Set the exposure calcu-
*lator dial®.
Turn the dial until the ASA/ISO film
speed index ® is opposite the number
for the speed of the film in use. The
three thick color-coded lines @
above the f/stop scale ® indicate the
three usable f/stops for automatic
operation and the distance scales @
below the usable f/stop scales give
you the range of flash-to-subject dis­
tance. For example, if you're using
ASA/ISO 100 film, the usable f/stops
are f/4, below the orange line, f/5.6,
below the yellow, and f/8, below the
blue. The range of flash-to-subject
distance for each f/stop is 0.6m to
8m (2 to 26 ft.), 0.6m to 5.6m (2 to
18 ft.), and 0.6m to 4m (2 to 13 ft.),
respectively. (For more information
on selecting the f/stop, refer to "Ex­
posure Calculator Dial" on page 12.)