Controls in detail-continued, Ready-light – Nikon SB 14 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONTROLS IN DETAIL-continued

Ready-Light (

Built into the back of the SB-14's flash head is a ready-

light which comes on as soon as the flash unit is recycled

and ready to fire. As an additional feature, the ready-

light blinks if the flash fires at its maximum output indi

cating that the light might be insufficient for correct

exposure on Automatic. The warning blinks last for ap

proximately two seconds. In this case, reset the lens aper

ture to the proper f/stop.

Note:

1) With a subject near the hr limit of the usable shooting range, it is

recommended to wait a few seconds after the ready-light comes on

before taking the shot.

2) When the batteries are nearly exhausted, the light output of the

flash unit decreases.