Ttl sensor cord sc-12, Sensor remote cord sc-13, Sync cord sc-15 – Nikon SB 14 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TTL Sensor Cord SC-12
One meter long, this cord allows the SB-14 to be used
with the Nikon F3 or F3 High-Eyepoint camera for auto
matic through-the-lens control of the flash exposure.
When attached, the camera's shutter speed is auto
matically switched to the proper flash synchronization
speed of 1/80 sec. with the shutter speed dial at A or
1/125 sec. and above. The ready-light inside the camera's
viewfinder also operates in the normal manner.
Sensor Remote Cord SC-13
Also one meter long, the SC-13 allows mounting of the
SB-14's Sensor Unit SU-2 directly on the Nikon FE, FM2,
FM, FG, or EM's hot shoe for automatic, off-camera
operation with the flash unit pointed in any direction.
With the Nikon F3 or F3 High-Eyepoint camera, the Flash
Unit Coupler AS-4 is reguired and control of the flash
exposure is automatic, but not through-the-lens.
Sync Cord SC-15
A coiled cord over one meter in length, the SC-15 screws
into the camera's sync terminal and allows the SB-14 to
be detached from its bracket and used off-camera.