Bracket mounting adapter – Nikon SB 14 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bracket Mounting Adapter ®
To detach the flash unit for off-camera flash operation,
push the release/locking wheel @ to the left and while
holding it, tip the flash forward until the two white dots
are aligned; then pull the flash unit away from the bracket.
Note:
To detach the bracket mounting adapter from the flash unit's
handle use a standard screwdriver to loosen the two screws on the
face of the adapter.