Basic operation - continued, 4, attach the sync cord, Check the position of the ''•flash head – Nikon SB 14 User Manual
Page 8: 0^ connect the power • supply
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION - continued
4, Attach the sync cord ©.
Screw one end of the Sync Cord SC-
11 into either of the flash unit's sync/
multiple flash sockets ® and screw
the other end into the camera's sync
terminal.
Nofe;
Some cameras do not have the threaded
sync terminal.
Check the position of the
''•flash head.
Make sure that the flash head is in
the normal shooting position.
0^ Connect the power
• supply.
Plug the cord from the power supply
into the flash unit's external power
terminal®.
Note:
The SB-14 is powered by only an external
power supply.