Specifications, Specifications -66, Continuous servo is possible in advanced mode only – Nikon Camera F50 User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
Type of camera
Picture format
Lens mount
Lens
Operation mode
Focus modes
Autofocus mode
Autofocus
detection system
Autofocus
detection range
Autofocus lock
Focus tracking
Integral-motor autofocus 35mm
single-lens reflex
24mm x 36mm (standard 35mm
film format)
Nikon F mount
AF Nikkor lenses (except AF-
Nikkor 80mm f/2.8, ED 200mm
f/3.5 IF, and autofocus converter
TC-16/TC-16A), and non-AF
Nikkor lenses (with limitation)
available
SIMPLE and ADVANCED
Autofocus and manual
Single Servo AF and Continuous
Servo AF*
*
Continuous Servo is possible in
ADVANCED mode only
TTL phase detection system using
Nikon advanced AM200 autofocus
module
Approx. EV -1 to EV 19 (at ISO
100
)
Possible, in Single Servo AF mode,
once a stationary subject is in
focus as long as the shutter
release button is lightly pressed
Automatically activated with a
moving subject