Using built-in flash, Notes on using built-in flash, Using built-in flash -55 – Nikon Camera F50 User Manual

Page 62

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING BUILT-IN FLASH

Notes on using built-in flash

Do not touch the flash when it is firing;

normal operation can cause it to heat up.

Never fire the flash more than 20

consecutive times at intervals of 5 sec.

or shorter. This may impair flash

performance. After each continuous

firing, let the flash rest at least 10

minutes before firing again.

When you continuously fire the flash,

the camera’s handgrip may become hot;

this is normal. Continuous firing will

result in a longer interval before the

ready-light comes on because it takes

longer for the flash to recharge

automatically.