Nikon 58-104 - Manual (Page 48)

Camera Slave (Cordless Remote Photography)
When used with the Nikonos RS,
the SB-104 can release the
camera’s shutter upon being
activated from a remote location by
another Speedlight. The SB-104
detects the remote flash with its
built-in slave sensor, fires its flash
and releases the camera’s shutter
simultaneously. This is useful when
you want to photograph hard-to-
approach or shy subject.
■ Important
Use Speedlight SB-104 or SB-102 as the
flash activating unit. Camera Slave (cordless
remote photography) is possible only when
the SB-104 is used with the Nikonos RS.
1 Turn OFF the power switch on the
SB-104 connected to the Nikonos
RS, and set the function seiector
to 0 “Cordiess Remote.” Then
set the Fiash mode to any desired
position.
—The function selector does not work
when the power switch is ON.
I Set the Focus mode on the Nikonos
I RS to “P” and set the distance in
advance. Then set the Sync mode
and Exposure mode to any desired
position.
—Autofocus operation is not possible for
Camera Slave (cordless remote
photography).
48