Note – Nikon 58-104 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Open the battery chamber cap by
lifting it up.
—The cover may be hard to open if the
0-ring isn’t properiy iubricated. In this
case, the 0-ring should be relubricated.
(See page 12.)
Load the battery.
' Insert the NiCd battery unit SN-104
into the battery chamber securely,
aligning the battery positioning
notch with the battery lock release
lever (orange).
—Slide the battery lock release lever
(orange) in the direction of the arrow
(->) to remove the battery.
Raise the buckle.
—Hold down the battery chamber cap and
engage the buckle hook to raise the
buckle.
Lock the release/lock buckle.
—Slide the buckle lock and press the
release/lock buckle to the Speedlight.
—Check to be sure there is no gap between
the battery chamber cap and the
Speedlight. The buckle should be securely
locked.
♦Note
standby switch
The SB-104 is provided with a standby switch
to conserve battery power. Refer to page 37
for details on the standby switch.
16