Clearing jams and clogs, Mm\m, Operation – Craftsman 987.799601 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

CLEARING JAMS AND CLOGS

mm\m

Before inspecting, cleaning or servicing the machine,

stop the engine and malce sure that all moving parts

have come to a complete slop. Disconnect the spark
piug wire and secure it away from the spark plug.

Failure to follow this instruction could result in

personal injury.

A clog or jam can cause the vacuuming and discharging
operations to decrease or even stop completely If this
occurs, take the following steps:

1, STOP THE ENGINE IMMEDIA TEL Y and wait for all

moving parts to stop. Disconnect the spark plug

wire and secure it away from the spark piug.

2. Check and clean, if necessary, the following areas in

the order given.

For all vacuuming operations:

1. Check that the collection bag is not overfilled.

2. While the bag is removed, check that the discharge

opening is not clogged.

For walk~behind vacuuming:

1. Check that the vacuum inlet opening is not clogged.

2. Use a stick to clear away debris.

For using the blower deflector:

1, Check that the blower deflector discharge opening is
not clogged

2. Use a stick to clear away debris

For using the vacuum hose:

Check that the hose is not clogged.

2. Remove the hose and use a long stick to clear away

any debris from the vacuum inlet opening.