beautypg.com

Maintenance and storage, Symbols, Control and operating symbols – Craftsman 536.881800 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

14. Do not overload the snow thrower capacity

by attempting to clear snow at too fast a
rate.

15. Never operate the snow thrower at high

transport speeds on slippery surfaces.

Look behind and use care when backing
up.

16.

Never direct discharge at bystanders or

ailow anyone in front of the snow thrower.

17. Disengage power to the coliector/impelier

when snow thrower is transported or not in

use.

18. Use only attachments and accessories ap­

proved by the manufacturer of the snow

thrower {such as tire chains, electric start

kits, ect.).

19. Never operate the snow thrower without

good visibility or light. Aiways be sure of
your footing and keep a firm hoid on the

handies. Walk;never run.

20.

Do not over-reach. Keep proper footing

and balance at aii times.

21. Do not attempt to use snow thrower on a

roof.

MAINTENANCE AND STORAGE

1.

Check shear bolts and other bolts at fre­

quent intervals for proper tightness to be
sure the snow thrower is in safe working
condition.

2.

Store the snowthrower away from ignition

sources or appliances that have a pilot

light, such as hot water and space heaters,

clothes dryers, etc.... Allow the engine

(motor) to cool before storing in any enclos­

ure.

3.

Always refer to operator's guide instruc­

tions for important details if the snow
thrower is to be stored for an extended

period.

4.

Maintain or replace safety and instruction

labels, as necessary.

5.

Run the snow thrower a few minutes after

throwing snow to prevent freeze-up of the

auger/impeller.

A

WARNING: This snow thrower is

for use on sidewalks, driveways
and other ground level surfaces.

Caution should be exercised while using on
steep

sloping

surfaces.

DO

NOT

USE

SNOW THROWER ON SURFACES ABOVE
GROUND LEVEL such as roofs of resi­

dences, garages, porches or other such

structures or buildings.

SYMBOLS

IMPORTANT: Many of the following symbols are located on your snow thrower or on litera­

ture supplied with the product. Before you operate the snow thrower, learn and understand
the purpose for each symbol.

CONTROL AND OPERATING
SYMBOLS

if

®

Slow

Fast

Electric Start Engine Start Engine Run

O I

N

Engine Off Engine Stop On

Choke Off Choke On Neutral

M

Throttle Primer Button ignition Key

Ignition Off

Ignition On

F-0410108L

4