Connect the base unit, Notes, Choose the dialing mode – Sony SPP-S9000 User Manual
Page 7: If you aren’t sure of your dialing system, Qchoose the dialing mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the base unit
If you want to hang the base unit on the wall, see “Mounting the base unit on a wall”
1
Connect the telephone line cord to the LINE jack and to a telephone outlet.
2
Connect the AC power adaptor to the DC IN 9V jack and to an AC outlet.
3
Raise the antenna. Make sure it points toward the ceiling.
Notes
• Use only the supplied AC-T123 AC power adaptor. Do not use
any other AC power adaptor.
• Connect the AC power adaptor to a continuous power supply.
• Place the base unit dose to the AC outlet so that you can
unplug the AC power adaptor easily.
Tip
If your telephone outlet is not modular, contact your telephone
service company for assistance.
Polarity of the plug
o-
Modular
Q
Choose the dialing mode
For the telephone to work properly, .select an appropriate dialing mode (tone or pulse).
Depending on your dialing system, set the DIAL
MODE switch as follows:
If your dialing
system is
Set the switch to
Tone
T
Pulse
p
If you aren’t sure of your dialing system
Make a trial call with the DIAL MODE switch set to T. If the call connects, leave the switch
as is; otherwise, set to P.