Note, Tips, To change a stored number – Sony SPP-S9000 User Manual
Page 12: Making calls with speed dialing, Paging, Pause), Making calls with speed dialing 1, Talk), Speed dial). 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note
Do not allow more than 20 secoiuls to elapse between each step of the proeedure.
Tips
•
K yon etuer a w rong nuntber, press ( PGM), then start Iroin the beginning.
• Use the supplied direeiorv to write down what you stored on the speed dialing numbers.
To store a number to be dialed via Private Branch
Exchange (PBX)
Before entering a phone number in step 4. do as follows:
1
Enter the outside line access digit (e,g„ 9).
2
Press
(PAUSE).
To change a stored number
Store a new number, as described previou.sly.
Making calls with speed dialing
1
Press
(TALK)
and wait until the TALK button lights up,
2
Press
(SPEED DIAL).
3
Enter the desired speed dialing number ((o) to CD).
The phone number stored in the speed dialing number will be dialed.
Paging
You can page the handset from the base unit. Note that you cannot page if the handset is in use.
To page
Pre.ss (
handset
T
ocator
).
The handset rings for about one minute.
To stop ringing, press
(TALK)
or
(OFF)
on the
handset.
Note
You cannot page the hand.sci when ils RING switch is set to OFF.