Mounting the base unit on a wall, Maintenance – Sony SPP-S9000 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting the base unit on a wall
1
Raise the hang-up tab.
2
Plug the telephone line cord to the LINE jack and the AC power adaptor to the
DC IN 9V jack, and hook the cords. Use the shorter cord for mounting.
3
Attach the wall bracket to the center of the base unit. Align the A marks of the
wall bracket with those of the base unit.
4
Plug the telephone line cord to the telephone outlet, and hook the base unit to the
wall plate.
5
Plug the AC power adaptor to an AC outlet. Then raise the antenna so that it
points towards the ceiling.
1
Tip
To remove the wall bracket, press the lower tabs.
Maintenance
• Clean the cabinets with a soft cloth slightly moistened with water or a mild detergent
solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol
or benzine as they may damage the finish of the cabinet.
• If the charge terminals of the base unit and handset are soiled, wipe them w ith a soft cloth.
If you have any queslittns or prttblems concerning your phone, please consult your nearest
Sony dealer.