Adjusting the speaker volume, Note, Step – Sony MHC-RXD7AV User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the speaker
volume
To enjoy Dolby Pro Logic Surround sound,
turn die Dolby Pro Logic mode on, then
adjust the volume of each speaker using the
test tone that the system provides.
step
2: Setting up your speakers
(continued)
1
Press 1X)LBY PRO LOGIC (or PRO
LOGIC ON/OFF on the remote).
"PRO LOGIC ON" appears,
2
Press T.TONE ON/OFF on the
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
[-► LEFT (front)------ ► CENTER—i
L
re
AR -
c
----------- RIGHT (front)
3
From your listening position, press
CENTER +/- and REAR +/- on the
remote to adjust the volume.
The volume levels from each speaker
must become the same.
4
Press T.TONE ON/OFF when you
are done adjusting.
The test tone turns off.
Tip
If you turn VOLUME (or press VOL +/- on the
remote) all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.