Sony MHC-RXD7AV - Manual (Page 42)

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from
70 - 20,000 Hz; rated 60 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
Front Speaker:
Continuous RMS power output (reference)
70 + 70 watts
(6 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 35 W)
Center Surround Speaker
Continuous RMS power output (reference)
30 watts
(6 ohms at 1 kHz,
1% THD)
Rear Surround Speaker
Continuous RMS power output (reference)
30 + 30 watts
(6 ohms at 1 kHz,
1% THD)
Inputs
MD/VIDEO IN:
voltage 450/250 mV,
(phono jacks)
DVD INPUT
impedance 47 kilohms
FRONT IN: Voltage 450 mV
(phono jacks) impedance 47 kilohms
CENTER IN: Voltage 450 mV
(phono jack) impedance 47 kilohms
REAR IN: Voltage 450 mV
(phono jacks) impedance 47 kilohms
WOOFER IN: Voltage 450 mV
(phono jack) impedance 47 kilohms
Outputs
MD/VIDEO OUT:
voltage 250 mV
(phono jacks) impedance 1 kilohm
PHONES: accepts headphones of
(stereo phone jack) 8 ohms or more
FRONT SPEAKER: accepts impedance of 6 to
16 ohms
REAR SPEAKER: accepts impedance of 6 to
16 ohms
CENTER SPEAKER: accepts impedance of 6 to
16 ohms
SUPER WOOFER: Voltage 1 V, impedance
1 kilohm
CD player section
System
Laser
Laser output
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
CD DIGITAL OUTPUT
(Square optical connector
Wavelength
Output Level
Tape player section
Recording system
Frequency response
(DOLBY NR OFF)
Wow and flutter
Compact disc and digital
audio system
Semiconductor laser
(X=780 nm)
Emission duration:
continuous
Max. 44.6 ^iW*
•This output is the value
measured at a distance of
2(Ю mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
20 Hz-20 kHz (±0.5 dB)
780 - 790 nm
More than 90 dB
More than 90 dB
jack, rear panel)
6СЮ nm
-18 dBm
4-track 2-channel stereo
60-13,000 Hz (±3dB),
using Sony TYPE I
cassette
±0.15%W.Peak(IEC)
0.1% WJRMS (NAB)
±0.2%W.PeakpIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
Anterma
Antenna terminals
Intermediate frequency
87.5 -108.0 MHz
FM lead antenna
75 ohm unbalanced
10.7 MHz
530 -1,710 kHz
AM loop anteiuxa
External antenna terminal
450 kHz
42