Sony MHC-RXD7AV - Manual (Page 6)

step 1: Hooking up the main unit
(continued) Inserting two size AAA (R03)
batteries into the remote
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press l/(!), the system
turns on and the demonstration
automatically ends.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
To connect optional components
See page 34.
To deactivate the demonstration
When you set the time ("Step 3: Setting the
time"), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DEMO while the system is off.
Tip
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer
connector.
To attach the speaker pads
Attach the supplied speaker pads to the
bottom of the center surround speaker to
stabilize ttie speaker and prevent it from
slipping-
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.