Sony MHC-RXD7AV - Manual (Page 24)

Programming the CD tracks
(continued)
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or'
from the display. 'SHUFFLE" disappears
To Press
Check the
program CHECK on the remote
repeatedly. After the last
track, "CHECK END"
appears.
Clear a track from
the end CLEAR on the remote in
stop mode.
Clear a specific
track CHECK on the remote
repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the
program 1 Select the disc tray with a
DISC 1-3 button.
2 Select the track by
turning the jog dial.
3 Press ENTER/NEXT.
Clear the entire
program ■ once in stop mode or
twice while playing.
Tips
• The program you made remains in the CD player
even after it huis been played back. Press CD ►!!
to play the same program again.
• I f a p p e a r s instead of the total playing time
during programming, this means:
- you have programmed a track number
which exceeds 20.
- the total playing time has exceeded 100 minutes.
The Tape Deck
Recording on a tape
manually
You can record from CD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of
the tape. The recording level is adjusted
automatically.
1
Insert a blank tape into deck B.
2
Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears.
3
Press RFC.
Deck B stands by for recording. The
indicator on TAPE B (for front side)
lights up.
24