Sony MDS-JA3ES - Manual (Page 27)

Editing Recorded MDs
Labeling tracks and. MDs with the remote [£ Changing an existing title X
1 Press NAME, then do the following:
tpcpqDqDcp
cpcpcpqDcp
^3 ^3 rm
^qpqpc^c^
[Ç] — Alphabet/number
buttons
■ CLEAR
•NUM
To change Make sure that the deck is
A track title Playing, pausing the track whose
title is to be changed, or stopped
after locating the track whose
title is to be changed
A disc name Stopped with no track number
appearing in the display
2 Keep pressing CLEAR (or EDIT/NO on the deck)
until the current title is erased.
1 Press NAME repeatedly until a flashing cursor
appears in the display, then do the following:
To label Make sure that the deck is
A track Playing, pausing, recording the track
to be labeled, or stopped after
locating the track to be labeled
AnMD Stopped with no track number
appearing in the display
Select the character type as follows:
To select Press
Lowercase letters CAPS repeatedly until "Selected
abc" appears in the display
Uppercase letters CAPS repeatedly until "Selected
ABC" appears in the display
Numbers NUM repeatedly until "Selected
123" appears in the display
3 Enter one character at a time.
After you enter a character, the cursor shifts
rightward and waits for the input of the next
character.
4 Rep>eat Steps 2 and 3 untQ you have entered the
entire title.
If you entered the wrong character
Press ◄◄ or ►► until the character to be corrected starts
flashing.
Press CLEAR to erase the incorrect character, then enter
the correct one.
5 Press NAME again.
The entered title appears on the left side of the
display window after the label has been recorded.
To cancel labeling
Press ■.
3 Enter the new title.
Do Step« 3 to 5 of "Labeling Recordings" on page 28,
or Steps 2 to 4 of "Labeling tracks and MDs with the
remote" on this page.
4 Press NAME.
Erasing all titles on a disc (Name Erase
Function)
Use this function to erase all titles on an MD
simultaneously.
Note that once erased, titles cannot be recovered.
1 Keep pressing EDIT/NO while the deck is stopped
until "All Erase ?" appears in the display.
2 Press EDIT /NO again.
"Name Erase ?" appears in the display.
3 Press YES.
AU titles are erased.
To cancel the Name Erase Function
Press ■.
You can erase all recorded tracks and titles
See "Erasing all tracks on an MD" on page 24.
29