Sony MDS-JA3ES - Manual (Page 15)

Recording on MDs
Synchro-Recdrding With a Sony
CD Player X
By connecting your deck to a Sony CD player or Hi-Fi
Component System, you can easily dub CDs onto MDs
using the CD synchro buttons on the remote. If your
deck is connected to a Sony CD player by the optical
cable or coaxial digital connecting cable through
DIGITAL IN OPTICAL or COAXIAL, track numbers
are automatically marked as appear on the original
regardless of whether "LevelSync ON" or
"LevelSyncOFF" is selected. If your deck is connected
to a Sony CD player by audio connecting cords
through LINE IN, track numbers are automatically
marked when you select "LevelSync ON" (see
"Marking Track Numbers While Recording" on page
13).
As the same remote controls both the CD player and
the deck, you may have trouble operating both units if
they are far from each other. If you do, place the CD
player close to this deck.
6 Press START.
The deck starts recording and the CD player starts
playback.
The track number and elapsed recording time of the
track appear in the display.
If the CD player does not start playing
Some CD player models may not respond when you press
START on the remote of the deck. Press II on the remote
of the CD player instead.
7 Press STOP to stop synchro-recording.
To pause recording
Press STANDBY or CD PLAYER
II.
To restart recording, press START or CD PLAYER II.
A new track number is marked each time you pause recording.
'Q' You can use the remote of the CD player during
synchro-recording
When you press ■, the CD player stops and the deck
pauses for recording.
When you press II, the CD player pauses and the deck
pauses for recording.
To restart synchro-recording, press ►.
cpcpqaqacp
cpcpqpcpqa
□p op
op op m
rin C
STANDBY
CD PLAYER II
1 Set the source selector on the amplifier to CD.
2 Do Steps 2 to 4 in "Recording on an MD" on page 4
to prepare the deck for recording.
'Q* You can change CDs during synchro-recording
Do the following steps instead of Step 7 above.
1 Press ■ on the remote of the CD player.
The deck pauses for recording.
2 Change the CD.
3 Press ► on the remote of the CD player.
Synchro-recording restarts.
'Q' You can check the remaining recordable time on the
MD
Press DISPLAY (see page 10).
3 Insert a CD into the CD player.
4 Select the playback mode (Shuffle Play, Program
Play, etc.) on the CD player.
5 Press STANDBY.
The CD player pauses for playing and the deck
pauses for recording.
15