To stop recording, To check the program, To clear a specific track or disc – Sony MHC-F150 User Manual
Page 39: To clear the entire program, To exit the program mode, Tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7
Program additional discs or tracks.
To program
Repeat Steps
Other discs
4 and 6
Other tracks on the same disc 5 and 6
Other tracks on other discs
4 to 6
8
Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. ►
(for front side) lights up.
9
Press DIRECTION repeatedly to
select to record on one side.
Select (or RELAY) to record on
both sides.
10 Press II PAUSE.
Recording starts.
To stop recording
Press ■ .
To check the program
Press CHECK repeatedly. After the last track,
"-END-" appears.
To clear a specific track or disc
Press CHECK repeatedly to display the step
you want to clear, then press CLEAR.
To clear the entire program
Press and hold CLEAR.
To exit the program mode
Press CONTINUE.
Tips
• If a track is cut off during recording on both sides
(because the tape ended while recording on the A
side), the track will automatically be recorded
from the beginning on the B side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY-NR so
that "DOLBY NR" appears after pressing CD
SYNCHRO.