Sony MHC-F150 - Manual (Page 29)

To You need to
Check the
program Press CHECK repeatedly.
After the last track, ''-END-''
appears.
Clear a specific
track or disc Press CHECK until the track
or disc you do not want
appears, then press CLEAR.
Clear from the
last track or disc Press CLEAR. Each time you
press the button, the last track
or disc will be cleared.
Clear the entire
program Press and hold CLEAR until
"CLEAR" is displayed.
Add tracks or
discs to the end
of the program Follow the programming
procedure.
Tips
• When you press CD ► II, you can play the same
program again.
• When you press PROGRAM during Continuous
or Shuffle Play, the program will be played after
the current track.
• If you replace discs, the programmed disc and
track numbers remain until you erase them. So,
the player plays only the existing disc and track
numbers. However, the disc and track numbers
that are not found in the player or on the disc are
deleted from the program, and the rest of the
program is played in the programmed order.
Playing your favorite
CD independently
— Plus One Play
when you insert a disc into the PLUS ONI;
slot, you can play the disc independently
from other discs. When using this function,
the player is automatically .set to the 1 DISC
play mode.
l/(b
(Power)
2 13
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Open the front cover.
3
Press PLUS ONE.
The indicator on the PLUS ONE button
lights up and "PLUS ONE" appears.
CJ>
continued