Sony MHC-F150 - Manual (Page 28)

Programming the CD
tracks
— Program Play
You can make a program containing up to 32
"steps", each "step" may contain either an
individual track or an entire disc. The
program is stored automatically.
I/Ci)
(Power)
34 7 1 2
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Press PROGRAM.
3
Turn the jog dial until the desired
disc number or Disc Memo appears.
To program the whole disc, make sure
"AL" is displayed below the TRACK
indicator and skip to step 5.
-------- 1-----
Disc number
Press or ► ► / until
the desired track number appears.
When the disc you select has Disc Memo,
it appears and then switches to the
following display.
_£_U----- (Cj-------L.
Track number
5
Press ENTER to program the track.
The programmed track and
corresponding step (playing order)
appear in the display.
Programmed track
L|J
Programmed disc Playing order
6
Program additional discs or tracks.
To program Repeat Steps
Other discs 3 and 5
Other tracks on the same disc 4 and 5
Other tracks on other discs 3 to 5
7
Press CD ► !!.
All the tracks play in the order you
selected.
To exit the program mode
Press CONTINUE.